Clients on a Public Wireless Network

Unanswered Question
Mar 12th, 2008


I have a problem with my wireless network were the client can connect using WEP to the AP's but they are not being assigned an ip Address from the DHCP pool on the core switch. I have looked in the logs on the eight AP's and cannot see any errors can anybody help with this?



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Wed, 03/12/2008 - 19:18

Is the ap's lwap or IOS? Verify that spanning-tree (vlan for the users) is forwarding all the way to the core.

Scott Fella Thu, 03/13/2008 - 05:37

You have the ip-helper configured on you l3? Also what you can do is configure a switch port for that vlan and plug a laptop into that to verify if dhcp is working or not.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode