Route Plan Report

Answered Question
Mar 12th, 2008

Hi, i'm using CM4.2

When I make a Route Plan Report of one extension (example 7032).. It appears 2 times 7032 in the same partition... one is SEP and other is ADP !

SEP0002B341ECAF

ADP0002B341ECAF

What is that ADP for ? Can I remove it ? Why does it appear ?

Thanks.

Andrei.

I have this problem too.
0 votes
Correct Answer by Michael Owuor about 8 years 8 months ago

hello Andrei,

ADP = Autogenerated Device profile

The autogenerated device profile, which is a special device profile, gets generated when you configure a phone for Cisco CallManager Extension Mobility and choose "Use Current Device Settings" from the Phone Configuration window. The autogenerated device profile then associates with a specific phone to be the logout device profile.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmcfg/b06dvprf.html#wp1028937

Regards,

Michael.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Michael Owuor Wed, 03/12/2008 - 09:41

hello Andrei,

ADP = Autogenerated Device profile

The autogenerated device profile, which is a special device profile, gets generated when you configure a phone for Cisco CallManager Extension Mobility and choose "Use Current Device Settings" from the Phone Configuration window. The autogenerated device profile then associates with a specific phone to be the logout device profile.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmcfg/b06dvprf.html#wp1028937

Regards,

Michael.

Actions

This Discussion