03-12-2008 08:59 AM - edited 03-15-2019 09:24 AM
I have configured an analogue phone that is connected to an FXS port on the CCME router (2801) I have been able to register it as a SCCP phone and it is integrated with Voicemail. it all works fine except that when the analog phone is called from an internal IP Phone the analogue phone doesn't start ringing until after 3 rings. I can hear the ringing tone from the Ip Phone but nou until the 4th call progress can I hear the analogue ring. any Ideas?
Solved! Go to Solution.
03-12-2008 09:10 AM
Then I'm afraid the following applies to you:
http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e372f.shtml
Try with an "import" phone.
Hope this helps, please rate post if it does!
03-12-2008 09:01 AM
Are you in the uk? Is that an "official" bt phone ?
03-12-2008 09:05 AM
Hi Paolo,
yes i am in UK and yes it is an actual bt phone
(Diverse 6350)
03-12-2008 09:10 AM
Then I'm afraid the following applies to you:
http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e372f.shtml
Try with an "import" phone.
Hope this helps, please rate post if it does!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: