P2P VPN with PIX

Answered Question
Mar 12th, 2008
User Badges:

Can someone point me in the right direction for setting this up so I can establish a P2P connection between two sites using the PIX devices at each location?

Correct Answer by Jon Marshall about 9 years 1 month ago

Hi


You don't say which version of pix software you are running. Here is a link to a basic site-to-site VPN between 2 pix firewalls for version 6.x. If you are running 7.x there is a link in the document for that as well.


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml


HTH


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 03/12/2008 - 11:11
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


You don't say which version of pix software you are running. Here is a link to a basic site-to-site VPN between 2 pix firewalls for version 6.x. If you are running 7.x there is a link in the document for that as well.


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml


HTH


Jon

Actions

This Discussion