2 questions

Unanswered Question
devang_etcom Wed, 03/12/2008 - 11:36
User Badges:
  • Gold, 750 points or more

ip rip v2-broadcast will force the router to send the RIPv2 as a broadcast... normally RIPv2 send update using multicast address...

Istvan_Rabai Wed, 03/12/2008 - 13:15
User Badges:
  • Gold, 750 points or more

Hi Ali,


In case of the MST, both commands should be OK.


spanning-tree mst 3 root primary

or

spanning-tree mst 3 priority 0


spanning-tree mst 3 root primary will not necessarily set the priority to 0, but to a lower value than the current root priority.


Please be aware, that setting the priority of SW1 to 0 will not make SW1 root if there is another switch in the network with priority 0 and lower mac-address than SW1.


Cheers:

Istvan

Actions

This Discussion