We have connectivity between two sites one with a 4/4SHDSL connection, the other has 2x 2048/384 ADSL connections. We are using GRE tunnels and EIGRP to load balance.
We are currently being shaped at the proivider edge out to the site with the 2 ADSL connections, causing delay for some specific interactive traffic, for arguments sake, telnet.
What we would like to do shape at the WAN edge for the 4/4 Site. Each tunnel would be shaped to 2000 thus shaping at the WAN edge rather than within the WAN where we have no control.
Within each shaper use CBWFQ to ensure bandiwidth the interactive traffic.
If I want to shape the tunnels, I can use the endpoint addresses, but there is no granularity to ensure that the interactive traffic is serviced over other traffic.
I cannot use qos pre-classify as the source and destination addresses are identical regardless of the tunnel used.
Also tunnel interfaces do not support CBWFQ policies
Its sort of a catch 22 at the moment.
Any thoughts on a general direction to persue?