Nat question on PIX

Unanswered Question
Mar 12th, 2008
User Badges:
  • Community Spotlight Award,

    Spanish Member's Choice: May 2016

Hi I have a Pix506 on site A which is configured with 2 tunnels IPSec to my corporate network.

My net on Site A is

On my site B I have a VPN 3000 (tunnel A-B) until now is ok

In site C (another VPN 3000) Tunnel (A-C).

Sites B & C are connected vía WAN eigrp.

I would like that tuneel A-C be a backup for tunnel A-B. The problem is that in sites B and C I have to configured an static route to traffic going to site A but those sites are connected so I can not have the same route in both sites....

How can I do in my Pix a NAt to translate traffic into a reach my site C. In site C I have a route to reach

Any nat suggestion? what I can do?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
James Lasky Thu, 03/13/2008 - 08:35
User Badges:


but if you are managing site A, B and C lan, why use NAT ? is there overlapping somewhere ?

How is the EIGRP peering made between site B and C ? Using a router in every site ?

If yes I can suggest to build a sort of wan (using a GRE tunnel) via Ipsec VPN with a router behind PIX506 in site A on both sites.

On all the three wan link run EIGRP and everything is dynamic if something fails...

If help pls rate.




This Discussion