VG224 line error on incoming FAX's

mgrimes · ‎03-13-2008

FAX's connected to VG224 receive line error on incoming FAX's. Outbouond FAX's complete successfully. This is an MGCP gateway I will include the MGCP config in this post

ccm-manager fallback-mgcp

ccm-manager redundant-host "Call Manager Publisher"

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server "Call Manager Publisher"

ccm-manager config

mgcp

mgcp call-agent "Call Manager Subscriber" 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp modem passthrough voip codec g711alaw

mgcp modem passthrough voip redundancy

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

no mgcp timer receive-rtcp

mgcp timer net-cont-test 3000

mgcp sdp simple

mgcp fax rate 9600

mgcp fax t38 inhibit

no mgcp explicit hookstate

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface FastEthernet0/0

mgcp bind media source-interface FastEthernet0/0

Thanks

m.batts · ‎03-18-2008

You will need to post the config of the other gateway where the calls come in from.

They need to be setup the same for things to work

cheers

mark

mgrimes · ‎03-21-2008

Mark,

Thanks for the post. to test that point I faxed between two fax machines on the same vg224. same result, line error. of course i am working under the belief that the gateway is not involved when calls are internal.