Request of printer authentication ???

Unanswered Question
Mar 13th, 2008
User Badges:

I was asked to authenticate by means of a ACS all the PCs, In order to carry out this requirement I had to configured the switch's port. However now I was asked to athenticate printers by means os ACS and the printers will be moved frequently.

Is is possible to authenticathe printers with this requirements?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jagdeep Gambhir Fri, 03/14/2008 - 05:44
User Badges:
  • Red, 2250 points or more

You need to set up MAB "Mac authentication bypass" on switch.



http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_37_se/configuration/guide/sw8021x.html#wp1205506



----------Commands Required on Switch--------------

aaa new-model

aaa authentication dot1x default group radius


dot1x system-auth-control


radius-server host

radius-server key



config t

interface

switchport access vlan

dot1x port-control auto

dot1x mac-auth-bypass

dot1x timeout quiet-period 15

dot1x timeout tx-period 3

dot1x reauthentication



Regards,

~JG


Do rate helpful posts


Actions

This Discussion