cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
412
Views
0
Helpful
1
Replies

Request of printer authentication ???

I was asked to authenticate by means of a ACS all the PCs, In order to carry out this requirement I had to configured the switch's port. However now I was asked to athenticate printers by means os ACS and the printers will be moved frequently.

Is is possible to authenticathe printers with this requirements?

1 Reply 1

Jagdeep Gambhir
Level 10
Level 10

You need to set up MAB "Mac authentication bypass" on switch.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_37_se/configuration/guide/sw8021x.html#wp1205506

----------Commands Required on Switch--------------

aaa new-model

aaa authentication dot1x default group radius

dot1x system-auth-control

radius-server host

radius-server key

config t

interface

switchport access vlan

dot1x port-control auto

dot1x mac-auth-bypass

dot1x timeout quiet-period 15

dot1x timeout tx-period 3

dot1x reauthentication

Regards,

~JG

Do rate helpful posts

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: