cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
351
Views
0
Helpful
1
Replies

WiSM Custom Internal Auth SSL

philclowes
Level 1
Level 1

Hi,

We're using custom internal auth on our new WiSM and it works great.

The only issue we have is that the self signed certificate prompts warning messages for the user before they can authenticate. We need to avoid this and are looking to get a proper certificate to replace it.

The web page appears to come from the virtual interface - in our case 1.1.1.1

a) is it possible to get a certificate from a certificate authority for this IP address?

b) can the same certificate be used on both controllers within the blade - or will it need two seperate ones?

c) To get a certificate I need to get the CSR to submit, but I can't find it?

Thanks,

Philip

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

You need a certificate that is trusted in your cert store. You might try to look at this. RapidSSL is one that I use alot.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

-Scott
*** Please rate helpful posts ***

View solution in original post

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

You need a certificate that is trusted in your cert store. You might try to look at this. RapidSSL is one that I use alot.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: