2811 E1

Unanswered Question
Mar 16th, 2008

I have cisco 2811 with VWIC-2T1/E1-RAN installed. I have IOS

(C2800NM-IPVOICE-M), Version 12.4(18)

But it is not recognizing the E1 card.even card router is not recognizing the card type command.

WIC Slot 0:

Unknown WAN daughter card

WIC module not supported/disabled in this slot

Hardware Revision : 3.0

Top Assy. Part Number : 800-25833-03

Board Revision : E0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : FOC11302ZTB

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Version Identifier : V01

Product (FRU) Number : VWIC-2T1/E1-RAN

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 04 BF 41 03 00 C0 46 03 20 00 64 E9 03

Please tell me which IOS will support these commands.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Paolo Bevilacqua Sun, 03/16/2008 - 16:31

That card is special made for telco and wireless operators, and is supported only in selected images. Please try an image from 12.4(11)SW3.

Hope this helps, please rate post if it does!

wasiimcisco Sun, 03/16/2008 - 17:53

Thanks for the reply, I upgrade the IOs 12.4(11)SW3 and now i am able to get the E1 card.

Thanks for the help and support.

Actions

This Discussion