FWSM actual CPS throughput

Report Inappropriate Content · ‎03-17-2008

Hi, I am going to perform some traffic throughput testing with an FWSM and traffic generators. I would like to know if anyone has done this type of testing before, if so can you share your results?

Thank you,

~AG

didyap · ‎03-21-2008

Following links may help you

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00808b4d9f.shtml

http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/pxpage.html

harvidsson · ‎10-06-2008

Hi Alonzo,

did you perform any throughput testing with the FWSM blades? What was the result.

Thank you

Henric

Report Inappropriate Content · ‎10-06-2008

No, not to date.

lynne.meeks · ‎10-15-2008

On a related note, how does one actually determine the maximum throughput that has already occurred on a FWSM?

I note that the 'sho traffic' command that I use on the ASA/PIX devices does not seem to exist on the FWSM.

Nor can I clear the counters on the interface to make data collection simpler...

thanks for any suggestions...