03-17-2008 07:49 PM - edited 03-03-2019 09:10 PM
Can someone please explain to me step by step on changing the network speed to full/100. everytime I do it, it seems to change back to auto.
03-17-2008 11:25 PM
Hi Robert, Is that Cisco IOS/CatIOS or any Operating System? Thanks Goutam.
03-18-2008 12:37 AM
Robert
IOS
switch(config)# int fa0/5
switch(config-if)# speed 100
switch(config-if)# duplex full
switch# wr mem
CatOS
switch# set port speed
switch# set port duplex
Note that the port will go down and then up when you change the settings.
HTH
Jon
03-18-2008 05:44 AM
Thank you. I am not sure whats going on then. Somehow my speed keeps resetting it's self to auto. I will try again, but thats trhe same commands I am using.
03-18-2008 06:37 AM
Do you have SNMP management with RW access on the switch by any chance?
Kevin Dorrell
Luxembourg
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: