03-17-2008 07:49 PM - edited 03-03-2019 09:10 PM
Can someone please explain to me step by step on changing the network speed to full/100. everytime I do it, it seems to change back to auto.
03-17-2008 11:25 PM
Hi Robert, Is that Cisco IOS/CatIOS or any Operating System? Thanks Goutam.
03-18-2008 12:37 AM
Robert
IOS
switch(config)# int fa0/5
switch(config-if)# speed 100
switch(config-if)# duplex full
switch# wr mem
CatOS
switch# set port speed
switch# set port duplex
Note that the port will go down and then up when you change the settings.
HTH
Jon
03-18-2008 05:44 AM
Thank you. I am not sure whats going on then. Somehow my speed keeps resetting it's self to auto. I will try again, but thats trhe same commands I am using.
03-18-2008 06:37 AM
Do you have SNMP management with RW access on the switch by any chance?
Kevin Dorrell
Luxembourg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide