cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1176
Views
0
Helpful
1
Replies

ASA5510 - Configuring AAA Servers - Error Message

itsupport
Level 1
Level 1

I created a LDAP server Group. When adding a server in the group, I have configured several different options and after I apply the options and test the connection I always get the same error "Authentication rejected: Memory Error". I do not know where the memory error is. Is it on the ASA device or the authenticating LDAP server?

1 Reply 1

didyap
Level 6
Level 6

Check the following link for a proper ldap config

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008089149d.shtml

If you're still having problems, then run "debug ldap 255" when using the test aaa command. Also, you can do a packet capture on the ASA for traffic between ASA and LDAP server. Also update the ASA software to latest image.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: