Solved: cme clid

rd1427 · ‎03-18-2008

Is it possible to route incoming fxo call on cme via the caller id? I would like options for anonymous callers. I do not have aim-cue.

paolo bevilacqua · ‎03-18-2008

Problem is that often there are legitimate calls, eg long distance or international, that have no clid.

Anyway if you want to reject calls with empty clid:

voice translation-rule 100

rule 1 reject /^$/

voice translation-profile no-anon

translate calling 100

voice-port x/y

trunk-group fxo

trunk group fxo

translation-profile incoming no-anon

Hope this helps, please rate post if it does!

paolo bevilacqua · ‎03-18-2008

Problem is that often there are legitimate calls, eg long distance or international, that have no clid.

Anyway if you want to reject calls with empty clid:

voice translation-rule 100

rule 1 reject /^$/

voice translation-profile no-anon

translate calling 100

voice-port x/y

trunk-group fxo

trunk group fxo

translation-profile incoming no-anon

Hope this helps, please rate post if it does!

rd1427 · ‎03-19-2008

Dear Sir;

You are the man!I have looked high and low for this answer.Could you direct me to a place on this site where I could learn more? Excellent response.

Thanks

paolo bevilacqua · ‎03-20-2008

Hi,

thank you very much for the appreciation.

The cisco references and guides are very good, but to go beyond that I suggest the cisco press books and practicing a lot.