Registering SIP dlink dph-300s on CCME 4.1

Unanswered Question
Mar 19th, 2008
User Badges:

Hello all!

I try register Dlink Sip Phone on CCME.

The part of my config is:

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

fax protocol none

h323

modem passthrough nse codec g711ulaw

sip

registrar server expires max 1200 min 300

!

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

voice register global

mode cme

source-address 192.168.0.231 port 5060

max-dn 20

max-pool 10

authenticate register

time-format 24

date-format D/M/Y

voicemail 90

file text

create profile sync 0246360689430548

voice register dn 5

number 5005

allow watch

name 5005

label 5005

mwi

!

voice register pool 5

id mac 001B.111E.1D42

number 1 dn 5

dtmf-relay rtp-nte

username cisco password cisco

codec g711ulaw


But then I try register phone I receive error message:

*Mar 23 08:33:38.063: VOICE_REG_POOL: Register request for (5005) from (192.168.

0.46)

*Mar 23 08:33:38.063: VOICE_REG_POOL: key(A50C0FED00035331) added to nonce table

*Mar 23 08:33:38.063: VOICE_REG_POOL: Contact doesn't match any pools

*Mar 23 08:33:38.139: VOICE_REG_POOL: Register request for (5005) from (192.168.

0.46)

*Mar 23 08:33:38.143: VOICE_REG_POOL: Contact doesn't match any pools

*Mar 23 08:33:50.527: EVENT: 1 node in nonce tree obsolete

*Mar 23 08:33:50.527: VOICE_REG_POOL: deleted key(61D04DE200033B5C) from nonce t

able

*Mar 23 08:34:01.503: VOICE_REG_POOL: Register request for (5005) from (192.168.

0.46)

*Mar 23 08:34:01.503: VOICE_REG_POOL: key(03BDBE8100035C59) added to nonce table

*Mar 23 08:34:01.503: VOICE_REG_POOL: Contact doesn't match any pools

*Mar 23 08:34:01.583: VOICE_REG_POOL: Register request for (5005) from (192.168.

0.46)

*Mar 23 08:34:01.583: VOICE_REG_POOL: Contact doesn't match any pools



Can any help me to resolve problem?

Thank you very much..


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
paolo bevilacqua Wed, 03/19/2008 - 03:06
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


set username, now "cisco", to be same as number, that is, 5005. If the phone is local on the cme lan, username is not needed, mac is enough. If it is remote, mac doesn;t matter and can be all 0s.


Hope this helps, please rate post if it does!

Mikhail Chernyakov Thu, 03/20/2008 - 12:39
User Badges:

Thank you very much!

All works fine. The trouble was dead ip-phone. I have changed ip phone and all works fine.





paolo bevilacqua Thu, 03/20/2008 - 12:40
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You are welcome. Remember to rate useful posts with the scrollbox below!

Actions

This Discussion