Not able to browse the internet through PIX 506e / 515e

Unanswered Question


I am installing PIX 515e through the PDM.

Looks like I have entered all the required information correctly but still not able to access the internet.

The router is working fine and I am able to access the internet if I connect my pc, with a range of the public IP address, directly to the switch to which the router is connected.

Host Configuration: / 24 gateway - ( Firewall Internal IP)

Firewall configuration: E1 -

E0 - A.B.C.D1

Router configuration: E0: A.B.C.D6.

S0: A.B.C.DD.

With all the configurations done I am still not able to browse the internet.

What rules I need to set on the firewall box?

Access list?


Could someone help me?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
abinjola Wed, 03/19/2008 - 05:08
User Badges:
  • Cisco Employee,

send me following output from Pix

sh nat

sh global

sh route

sh access-g

aabdullah25 Wed, 03/19/2008 - 05:27
User Badges:


You have to enable NAT, basically it is PAT using NAT and GLOBAL commands.

For example using CLI:

nat (inside) 1

global (outside) 1 interface

Also add

route outside A.B.C.D6

hope this helps.



This Discussion