CME B-ACD MoH gets choppy

Answered Question
Mar 19th, 2008


I am having a problem with B-ACD Moh. What happens....when i call in, i get the CUE-AA (thanks for 2 for Customer Service) when i press 2 it goes to the B-ACD hunt group and listed extentions ring 1 after another. if no one picks up the phone then i(as a caller) get ..all agents are busy message and then get the moh while on hold ... now problem starts from here when i get that seconde-greeting message again(all agents are busy)right after that Moh gets choppy.

when i do a debug i see the following: see the Attachments

CME ver: 4.2

IOS ver:c2800nm-spservicesk9-mz.124-11.XW1.bin

any input will be appreciated


I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 8 years 7 months ago

Hi, XW1 is very buggy, can you upgrade to XW6 and try again ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
miqbal_786 Wed, 03/19/2008 - 07:04

Thanks for the input brother.

i will try that and see how it goes.

Thanks again

chrclark Wed, 03/19/2008 - 07:23

The issue sounds like a problem with

language selection in the parameters possibly causing TCL to not be able to find audio files and running up the CPU. I noticed the following config.

paramspace english index 3

under EFS-CustSrv. What is index 3?

This is just a wild guess, but I would try changing that from 3 to 1 unless you are sure of that config for you application.


miqbal_786 Wed, 03/19/2008 - 07:40

it used to be index 1 ... so i thought why not i should change it to 3 and try but no luck.

this is what happens after the second greeting ... moh...choppy...moh..choppy..moh..chopp :-)


Rajesh Revuru Wed, 03/19/2008 - 07:48

Does it happen when call you from inside as well? My guess i am thinking would either be something wrong with the file or something to do with codec transcoding..

miqbal_786 Wed, 03/19/2008 - 07:55

this is only happening with internal calls for now since the customer is not live yet.

i am basically testing it at home (in my lab) later on i'll try calling it from FXO and T1 Pri and test it how it works (at home).


miqbal_786 Fri, 03/21/2008 - 20:46

Finally, its working. i downgraded my IOS from c2800nm-spservicesk9-mz.124-11.XW1.bin to this ---> c2800nm-advipservicesk9-mz.124-4.XC4.bin" and i'm not seeing any issues so far everything works perfect.

Thanks for all of your inputs.



This Discussion