Spain PRi configuration

Answered Question
Mar 19th, 2008
User Badges:

Hi all,

does anyone knows what are the paremeters for configure a Pri line throught MGCP in a Callmanager?

(PRI Protocol Type, line codinf, framing, ...)


thanks in advance



Correct Answer by paolo bevilacqua about 9 years 4 months ago

Like all European contries, switchtype primary-net5, linecode hdb3, framing usually crc4.


hope this helps, please rate post if it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Wed, 03/19/2008 - 09:33
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Like all European contries, switchtype primary-net5, linecode hdb3, framing usually crc4.


hope this helps, please rate post if it does!

carlosjlopez Wed, 03/19/2008 - 09:38
User Badges:

that's correct, the problem was that I selected a T1 interface instead E1 one. therefore this parameters didnt appear. Now it's correct.


thank you very much for your faster answer.





paolo bevilacqua Wed, 03/19/2008 - 09:40
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You're welcome, please remember to rate posts using the scrollbox below!

carlosjlopez Wed, 03/19/2008 - 09:59
User Badges:

thanks again,

Do you Know how can I receive all calls (from this Pri line) in a Line Group?


The MGCP gateway is configured.

The line group is Configured.


Actions

This Discussion