radius config

Answered Question
Mar 19th, 2008
User Badges:

I am trying to set up Radius on a cat4506 with IOS version 12.2 but none of the radius-sever commands work. There isn't anything about radius when using the "?" in config mode. Any ideas?

Correct Answer by andrew.butterworth about 9 years 4 months ago

You need to enable aaa by entering the command:


aaa new model


After that the aaa authorization, authentication and accounting commands should be available as well as the radius-server commands.


HTH


Andy

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
andrew.butterworth Wed, 03/19/2008 - 13:17
User Badges:
  • Gold, 750 points or more

You need to enable aaa by entering the command:


aaa new model


After that the aaa authorization, authentication and accounting commands should be available as well as the radius-server commands.


HTH


Andy

francisco_1 Wed, 03/19/2008 - 14:09
User Badges:
  • Gold, 750 points or more

see below for full radius config. the config will also fallback to local authentication if your radius server is down.


aaa new-model

radius-server host (your radius server ip) auth-port 1812 acct-port 1813

radius-server key (your radius secret key

radius-server source-ports 1645-1646

username **** password ******

aaa authentication login default group radius local

aaa authentication login console local



Franco

Please rate if this helps.

Actions

This Discussion