2nd call line display

Unanswered Question
Mar 20th, 2008
User Badges:

If you have 2 lines on a phone and one is active in call - a call to the 2nd line can only flash/beep/ring.....is there a way to have it show up on the screen?

It does this for a 2nd call to the line that is active but not another line.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Thu, 03/20/2008 - 18:06
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Manish,

Try changing the System setting Auto-Line Select. With this Enabled the Display Focus (and Softkeys) always switch to the new incoming call.

Also available on an individual phone via this setting;

Device>Phone>Phone Configuration>Product Specific Configuration>Auto Line Select>Enabled

Hope this helps!



This Discussion