cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
235
Views
5
Helpful
2
Replies

Dial-peers

miket
Level 5
Level 5

I have a small issues, I have several t1's coming into a gateway and I am using cme as srst and bacd as a backup solution. The issue I am having is trying to get several nummbers inbound ie xxx-xxx-1000, xxx-xxx-3050 to transform to a single four digit number so that bacd will kick off..

SO i need several 10 digit inbound to translate to a single four digit like 1000. Any ideas.. I am trying with several pots and a voip dial peers

Help maybe I have just over thought it

2 Replies 2

Brandon Buffin
VIP Alumni
VIP Alumni

One option is to use a translation rule to accomplish this, such as:

voice translation-rule 1

rule 1 /1112221000/ /1000/

rule 2 /1112223050/ /1000/

voice translation-profile profile1

translate called 1

dial-peer voice 1 pots

translation-profile incoming profile1

The translation profile could also be applied to the incoming voice port, such as:

voice-port 0/1/0:23

translation-profile incoming profile1

Hope this helps. If so, please rate the post.

Brandon

Brandon Thanks for the quick reply. I will try this and let you know.

I had done this but I created a voip dial peer that pointed to BACD when maybe I should have put the bacd on the pots

Thanks again.. I really needed someones confirmation you know how it is

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: