Hi all. I have been trying to establish a etherchannel between a Cisco 6500 switch and a Solaris 10 server over it's 2 gigabit ports but without much luck.
The thing is that when I configure everything I can see the etherchannel go up but the problem is that I can ping the server from server VLAN and the server can ping only inside server VLAN and not outside it. If I try to ping from outside the VLAN and vice versa I get time outs. I can still ping all the other servers in the server VLAN from other VLAN's.
I'm attaching the relevant parts of the config so maybe someone can see something that I'm missing.
Thanks in advance for all the help.
The EtherChannel is working fine, i believe that the problem is most probably the absence of a default gateway on the server.
P.S. The "switchport trunk encapsulation dot1q" is irrelevant under the port-channel, you don't need it in your setup.