How to upload IOS on 3560 switch, see what all options i am getting.....
Issue the following commands:
Next you need to change the baud rate on the switch, otherwise it will take about 2 hours to transfer the IOS via xmodem.
3) set BAUD 115200
After you issue the baud rate command on the switch make sure you also change it in Hyperterminal or whatever software terminal emulation software you use. Otherwise you won't be able to communicate to the switch.
4) copy xmodem:"image_filename.bin" flash:"image_filename.bin"
5) In Hyperterminal select "Transfer" and select "send file". Change the protocol to xmodem. Next select browse and navigate to where you have stored the IOS that you would like to transfer to the switch. Click send.
The transfer will take about 30-40 minutes.
The new IOS should boot at this point. If you need more in depth instructions check out this link.