SIP Route Pattern add failed -1 error

Unanswered Question
Mar 22nd, 2008
User Badges:
  • Silver, 250 points or more

I am trying to trunk an asterisk and CCM 5.1 to each other. Inbound from the asterisk works, however outbound to the from CCM to asterisk does not :(. I was trying a normal route pattern and now I see SIP Route Pattern. WHen I try to add a SIP Route Pattern I get Add Failed -1. Anyone know why this happening and I can't add a SIP Route Pattern? Also does anyone know if its necessary to use a SIP route pattern or a will normal route pattern work like it did in 4.2


this is a 5.1.1


Thanks,


Chad

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
hadbou Thu, 03/27/2008 - 12:34
User Badges:
  • Bronze, 100 points or more

TRY - CSCsm61286



Symptom:

call from an Cisco IP Phone to certain carrier fails when after ringing the PSTN cell phone ((e.g T Mobile) , call is forwarded to Voicemail.


OR

calls from an Cisco IP Phone to certain PSTN carrier fails when after ringing the PSTN home phone , call is forwarded to Voicemail. (e.g Home phone with personal Answering machine )


caller gets disconnected and caller can not leave VM.


Conditions:


"SIP Rel1XX Enabled" service parameter on the CallManager is set to True.


SIP trunk in G729 Device Pool


Workaround:

none.

Further Problem Description:

CUCM 5.x , 6.x does not support 181 SIP message, This is an enhancement request.


Adrian Saavedra Thu, 03/27/2008 - 13:02
User Badges:
  • Gold, 750 points or more

Hi Chad,


A few months ago, I configured a SIP trunk and normal route-patterns between a CCM 4.1 and an Asterisk Server.


At the beginning my calls didn't work. I detected that the SIP Trunk Outgoing Transport Type in CCM was using TCP. I changed to UDP and calls start working.


Also, notice the CSS used in Inbound Calls in the SIP trunk.


Regards,


-- adrián.

mymite060708 Tue, 05/06/2008 - 08:00
User Badges:

hi


did you ever get this working?


I get the same error and can;t can incoming or outgoing working on asterisk (it did work with CM4 using)



allow=ulaw&alaw

canreinvite=yes

context=from-pstn

disallow=all

dtmfmode=rfc2833

host=

insecure=port,invite

nat=no

port=5060

qualify=no

type=friend



Actions

This Discussion