IPIPGW Lab

Unanswered Question
Mar 23rd, 2008

Hi,

I have set up a small LAB for IPIPGW, i can go through it with G711 but when i begin to manipulate the codec, like using using G729 it does not work.

what i need to do:

1) CCM 1 (G711) IPIPGW (G729) CCM2;

I have transcoding for CCM1, CCM2 and for the IPIPGW running but no luck

2) CCM1 104 calls CCM2 7002 get a busy tone when off hook.

I donno what i am missing???

Good day




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gogasca Sun, 03/23/2008 - 12:14

Could you please upload

debug voice ccapi ino

debug h225 asn1

debug h225 q931

debug h245 asn1


Please?

twissam Sun, 03/23/2008 - 12:27

Hi,

attached are the debugs. i have noticed something during my tests as follow

CCM1 (G711) icoming Dial-Peer IPIPGW (G711)

Outgoing DIal-Peer IPIPGW (G729) CCM1 (G729) this combination works

and i see transcoding done by the IPIPGW from G729 to G711. Why i cannot make CCM1 (ICT as G711)!!!

Good day




Attachment: 
twissam Sun, 03/23/2008 - 12:33

CCM1 (G711) icoming Dial-Peer IPIPGW (G711)

Outgoing DIal-Peer IPIPGW (G729) CCM2 (G729) this combination works

and i see transcoding done by the IPIPGW from G729 to G711. Why i cannot make CCM2 (ICT as G711)!!!

Sorry it should be CCM2. The other annoying part as well is that when G729 in CCM2 i cannot use the hold, transfer, etc... please note that the MTP is checked for both ICT Non GK controlled.


Good day


Actions

This Discussion