I'm new to this and was asked to install this new asa 5505 at he main office and eventually install site to site vpn (did it easily with RV042 but this one is more complex...
Using ASDM 6, configuring static ISP IP, there is no place to enter the ISP Gateway, Am i missing something? This seemed to be there for older version but not there anymore???
The monitoring (home) shows my outside interface as 'down' and no data 'recorded' but I can surf the web. Am I missing something again?
I'm new to this so I need basic help and the documentation is not clear on those issues.
Thanks to all
Paul, glad you have it resolved, Im also glad I could help.
I forgot to add another link because you said that you will configure three different vpns statablish or L2L vpn tunnels with three different sites, when you configure your first L2L VPN you may want to reference bellow link for adding a second L2L tunnel to an already exsiting L2L vpn, same principle applies for a 3rd or 4th L2L vpn with different peers.
don't forget to rate post, this encourages everyone to help out and participate in forum.
Add a new L2L VPN or RA VPN to an exsisting L2L Tunnel.