Intercom capabilty

Answered Question
Mar 23rd, 2008

Hello

How do I configure Intercom capability for 79xx phones.Currently utilizing CCM4.2.

I have this problem too.
0 votes
Correct Answer by Jaime Valencia about 8 years 10 months ago

if this is CUCM 4.2 then there is no intercom capability, at most you can configure a speed-dial on one phone and auto-answer with speakerphone on the other one. you would need CUCM 6.x for intercom

if this is CME follow this guide

Configuring Intercom Lines

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinter.html

HTH

javalenc

if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Sun, 03/23/2008 - 21:02

if this is CUCM 4.2 then there is no intercom capability, at most you can configure a speed-dial on one phone and auto-answer with speakerphone on the other one. you would need CUCM 6.x for intercom

if this is CME follow this guide

Configuring Intercom Lines

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinter.html

HTH

javalenc

if this helps, please rate

ciscomanii Mon, 03/24/2008 - 21:06

Thanks for the idea . i have tested phones with the auto-answer before but it would auto answer every incoming call. now im thinking of configuring internal DN's known only by a unit supervisor and its members ( whose cubicles are physically dispersed) so that when called would contact the intended unit member utilizing Auto Answer.Of course all of the internal #'s would be setup with speed dial.

Actions

This Discussion