Giving IP address and DCHP to aironet 1250

Unanswered Question
Mar 23rd, 2008
User Badges:


We need to give an ip address to 1250 just for the managemnt purpose ( similar to VLAN1 ip address given in case of L2 switches ). And then Aironet1250's gigbit ethernet will be connected to our Core L3 4507 swicth which has DHCP running. And will distribute the IP address to wireless clients. In this case how to configure an ip address and also have DHCP running. Management IP adress is not in the range of the DHCP pool. so in case any configuration is required on Aironet device we will connect a notebook with a same subnet ip address as that of Aiornet device , and then telnet / ssh to management IP of aironet devive.

Any experience pls share.

Any configuration link on is appreciated.

Thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Fri, 03/28/2008 - 17:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode