cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
332
Views
0
Helpful
2
Replies

Giving IP address and DCHP to aironet 1250

bapatsubodh
Level 1
Level 1

hi,

We need to give an ip address to 1250 just for the managemnt purpose ( similar to VLAN1 ip address given in case of L2 switches ). And then Aironet1250's gigbit ethernet will be connected to our Core L3 4507 swicth which has DHCP running. And will distribute the IP address to wireless clients. In this case how to configure an ip address and also have DHCP running. Management IP adress is not in the range of the DHCP pool. so in case any configuration is required on Aironet device we will connect a notebook with a same subnet ip address as that of Aiornet device , and then telnet / ssh to management IP of aironet devive.

Any experience pls share.

Any configuration link on cisco.com is appreciated.

Thanks in advance.

Subodh

2 Replies 2

Scott Fella
Hall of Fame
Hall of Fame

Take a look at this doc..... hope it helps.

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap4-first.html#wp1103999

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: