Rob Huffman Mon, 03/24/2008 - 08:33
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ricardo,


Hope all is well :) It must be entered this way;


csim start


Note: start not star


Hope this helps!

Rob

mattcalderon Mon, 03/24/2008 - 09:14
User Badges:
  • Silver, 250 points or more

example:


csim start 918005464454


/endexample


Use the above only input your own information.


Note: This can only be used with H323 gateways and then only if you have your dial-peers configured correctly.


MC

ricardorojas123 Mon, 03/24/2008 - 12:38
User Badges:

I enter the command but the phone don't ring.


The dial-peer is configured in the Gateway.

The phone is registered in the Call Manager Express.


And this message is show:

Router#csim start 2001

csim err:csim_do_test invalid major major(16) minor(0)

mattcalderon Mon, 03/24/2008 - 12:39
User Badges:
  • Silver, 250 points or more

Is the DN you are trying to call part of your ephone configuration? I am not sure if you can use the csim start command to call an ephone vs a regular analog line or PRI. I could be wrong. Paulo or Rob may know though.

ricardorojas123 Mon, 03/24/2008 - 12:46
User Badges:

Is a Call Manager Express version 4.1 in a Router 2800, and this have the dial-peer configured.

Actions

This Discussion