03-24-2008 10:07 PM
How can I assign an ACL to an existing LAN-2-LAN tunnel. I want to limit traffic through the tunnel down to a specific IP address and TCP port?
03-25-2008 12:44 AM
Hi
Which device and what version of software are you running on that device ?
Jon
03-25-2008 07:47 AM
ASAs on both ends with IOS ver 7.2
03-25-2008 08:28 AM
Easiest thing to do would be to use a vpn-filter on the L2L tunnel. Please see attached link for details
http://cisco.com/en/US/docs/security/asa/asa72/command/reference/uz_72.html#wp1411607
HTH
Jon
03-25-2008 07:18 AM
You can use Policy NAT and access-list.
Thanks,
Dharmesh
03-25-2008 07:23 AM
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml
See on above link, it has some hint for Burst size.
Thanks,
Dharmesh
03-28-2008 11:38 AM
Resolved the issue myself ... Thanks everyone
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: