03-24-2008 10:07 PM
How can I assign an ACL to an existing LAN-2-LAN tunnel. I want to limit traffic through the tunnel down to a specific IP address and TCP port?
03-25-2008 12:44 AM
Hi
Which device and what version of software are you running on that device ?
Jon
03-25-2008 07:47 AM
ASAs on both ends with IOS ver 7.2
03-25-2008 08:28 AM
Easiest thing to do would be to use a vpn-filter on the L2L tunnel. Please see attached link for details
http://cisco.com/en/US/docs/security/asa/asa72/command/reference/uz_72.html#wp1411607
HTH
Jon
03-25-2008 07:18 AM
You can use Policy NAT and access-list.
Thanks,
Dharmesh
03-25-2008 07:23 AM
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml
See on above link, it has some hint for Burst size.
Thanks,
Dharmesh
03-28-2008 11:38 AM
Resolved the issue myself ... Thanks everyone
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide