03-25-2008 03:27 AM - edited 03-15-2019 09:37 AM
Hi,
where can i find the firmware loads for 7942 and 7962 phones.
I checked in Cisco but m not able to find it.
Solved! Go to Solution.
03-25-2008 04:34 AM
You need a support contract to downlaod software from CCO.
If you have it, the FW is under "voice software" - "Cisco Ip phone 7900 firmware".
If you don't have a support contract, you can buy one from any official cisco reseller.
03-25-2008 04:34 AM
You need a support contract to downlaod software from CCO.
If you have it, the FW is under "voice software" - "Cisco Ip phone 7900 firmware".
If you don't have a support contract, you can buy one from any official cisco reseller.
03-25-2008 05:00 AM
hi,
thanks for your reply i found the firmware. one query will it work with ccme??
03-25-2008 05:07 AM
Yes it will.
Thanks for the nice rating and good luck!
03-25-2008 05:11 AM
Hi Sandeep,
Just thought that I would add this note to the great info from my friend Paolo;
Q. What Cisco Unified Communications Manager Express release is required for the phones?
A. The Cisco Unified IP Phone 7962G and 7942G models are first supported by Cisco Unified Communications Manager Express Version 4.1, Cisco IOS Software Release 12.4(15)T (available now).
From this good Q&A doc;
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: