7985 isuue

Unanswered Question
Mar 25th, 2008

my 7985 iphone can not dial the pstn.but

others is no problem.CCS and partion is ok! there is my debug:

26 03:23:39.830: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0122

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA1839E

Preferred, Channel 30

Calling Party Number i = 0x0181, '20050'

Plan:ISDN, Type:Unknown

Called Party Number i = 0x80, '7037531'

Plan:Unknown, Type:Unknown

*Mar 26 03:23:40.114: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8122

Channel ID i = 0xA9839E

Exclusive, Channel 30

*Mar 26 03:23:41.274: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x8122

Cause i = 0x84B7 - Unknown cause value

*Mar 26 03:23:41.278: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x0122

Cause i = 0x80E4 - Invalid information element contents

*Mar 26 03:23:41.346: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8122

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kenneth Mohammed Wed, 03/26/2008 - 11:56

7985 sets are going to try to setup a video call by default. Therefore, under the voice-port config in your gateway, you should put the statement "bearer-cap Speech". This should resolve your issue.

If you found this helpful kindly remember to rate this post.

Thanks

Actions

This Discussion