Brandon Buffin Wed, 03/26/2008 - 07:43
User Badges:
  • Purple, 4500 points or more

Can you post your config as well as the domain name entered for your gateway in CCM config?


Brandon

mattcalderon Wed, 03/26/2008 - 07:51
User Badges:
  • Silver, 250 points or more

I agree with Brandon. your host name and domain name MUST match between the call manager and your gateway.


Link for Gateway config.

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf1.html#wp1027337


Check this link for troubleshooting gateway registration failures

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805a316c.shtml#prob


sandeep pokhriyal Wed, 03/26/2008 - 08:05
User Badges:

hi,


thx for prompt reply.


the gateway name is same in callmanager and gateway. i tried removing domain also.


i am posting the config and debug of mgcp events.



Attachment: 
Brandon Buffin Wed, 03/26/2008 - 08:11
User Badges:
  • Purple, 4500 points or more

From "R01801.interior.gov.bh" in the debug, it appears that you have a domain name configured on the gateway. Be aware that this domain name must appear in the CCM config as well. You cannot simply use R01801.


Hope this helps.


Brandon

sandeep pokhriyal Wed, 03/26/2008 - 08:49
User Badges:

ya i tried both adding and removing ip domain from router and CCM but still the same issue with other routers its working.. donno whts wrong with this one.

mattcalderon Wed, 03/26/2008 - 08:11
User Badges:
  • Silver, 250 points or more

After looking at your debug, you have verified that your gw name in ccm is R01801.interior.gov.bh ?



mattcalderon Wed, 03/26/2008 - 08:12
User Badges:
  • Silver, 250 points or more

just a bit quicker than I brandon, but essentially the same thing.

sandeep pokhriyal Wed, 03/26/2008 - 09:52
User Badges:

ya i tried both adding and removing ip domain from router and CCM but still the same issue with other routers its working.. donno whts wrong with this one.

Zin.Karzazi Wed, 03/26/2008 - 10:12
User Badges:
  • Silver, 250 points or more

do a "no mgcp" then "mgcp" again, see if that could bring the GW to register.

please also post the "show ccm-manager" output.

sandeep pokhriyal Sat, 03/29/2008 - 22:59
User Badges:

hi,


I am able to register the gateway.


i just registered one of the port of gateway on the callmanager and it worked like it should have...


thanks for all your contributions.

Actions

This Discussion