Double translations - possible?

Unanswered Question
Mar 26th, 2008

I need to be able to have a host on Network-A to be able to connect to a router on Network-C - with Network-B in the middle.


Is it possible to NAT an IP from Network-A to Network-B - then NAT the resultant Network-B IP to an IP on Network-C?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 03/26/2008 - 13:02

Hi


Assuming you mean NAT the source IP address then yes this is perfectly possible. You just set up your NAT translations on each router eg


Router A


ip nat inside source static 192.168.5.10 172.16.5.10


Router B


ip nat inside source static 172.16.5.10 10.1.1.5


where


192.168.5.0 is NET A

172.16.5.0 is NET B

10.1.1.0 is NET C


HTH


Jon

Joseph W. Doherty Wed, 03/26/2008 - 13:39

BTW: It's also possible to double NAT on a single router, useful when two networks address space overlaps.

Actions

This Discussion