6500-Secondary IP a L3 Vlan Interface- Native IOS

Answered Question
Mar 26th, 2008
User Badges:



Can I do something like this to my 6509


interface Vlan99

ip address 192.168.99.100 255.255.255.0

ip address 192.168.99.1 255.255.255.0 secondary


long story short, have about 100 serves that are using 99.1 as their default gateway and several others using 99.100 as their dfgw.


6509 has Sup720 running native mode.


thanks



Correct Answer by Jon Marshall about 9 years 3 months ago

Hi


Well i just tested this on a 6500 run 12.2(18)SXF6 and it didn't complain and i could ping both addresses.


interface Vlan322

ip address 192.168.99.1 255.255.255.0 secondary

ip address 192.168.99.100 255.255.255.0

no ip redirects

end


Bear in mind this was in a lab environment, i have never done this in a production environment.


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 03/26/2008 - 13:37
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Well i just tested this on a 6500 run 12.2(18)SXF6 and it didn't complain and i could ping both addresses.


interface Vlan322

ip address 192.168.99.1 255.255.255.0 secondary

ip address 192.168.99.100 255.255.255.0

no ip redirects

end


Bear in mind this was in a lab environment, i have never done this in a production environment.


Jon

dmooreami Wed, 03/26/2008 - 13:50
User Badges:

thanks. I remember seeing something in release notes long time ago about 6500 code support HSRP on secondary IP's.


Gee wish I had a 6500 in my lab. :)

Jon Marshall Wed, 03/26/2008 - 13:51
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

No problem.


Yes, i appreciate i am lucky to have a 6500 to play with !


Jon

Actions

This Discussion