03-27-2008 07:52 AM - edited 03-09-2019 08:23 PM
What is the command to show date on the AS/5300?
Thanks.
Diane
03-27-2008 08:06 AM
The SHOW CLOCK command will show you the date and time set on the AS5300....
03-27-2008 01:24 PM
Thanks for your quick response. When I typed SHOW CLOCK, it displayed
22:06:21.188 UTC Fri Feb 4 2000
We are in PST (Pacific Standard Time). Today is 3-27-08. The time is about 1:20 pm. Does "Show Clock" show the correct date and time? Thanks.
03-27-2008 01:45 PM
The time of a device can be manually set or set with the use of the NTP protocol clocking off a master timing device. In your case you may need to manually set it with the command CLOCK SET command. From there you can set the date/time of the AS5300. If your network devices are all timing off one source then you may want to set your AS5300 to time off the same source. Use the NTP command to set up your parameters. You can go to the following URL for help on the subject...
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.6/configuration/guide/ntp.html
Good Luck...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide