03-27-2008 08:57 AM - edited 03-13-2019 05:07 PM
Is there a special code to use the intercom feature on our IP 7961 phones?
03-27-2008 09:21 AM
it would be really helpful if you tell us what you're using.
CUCM or CME and version
javalenc
03-27-2008 10:06 AM
We are using CME. I think the version is win-k9-1_5(0.37).
03-27-2008 12:26 PM
Hello,
There is not a special code, but you cam make tje intercom feature only diable from specicif phones.
ephone-dn 1
number 1000
ephone-dn 2
number 1001
ephone-dn 10
number A1010
intercom A1011
ephone-dn 11
number A1011
intercom A1010
ephone 1
button 1:1 2:10
phone 2
button 1:2 2:11
With this cofig, only ephone 1 and 2 can intercome each other.
Drop the "A" from the intercom ext, then the number can be globally dialed.
There are other configs, but these are the basics.
03-27-2008 01:08 PM
Thank you for the response. Do you need to config this through the Config Assistant or can this be done on the phone itself?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide