Guest Access with a 1240AG

Answered Question
Mar 27th, 2008
User Badges:

I have a 1240AG connected to a 3560 connected to a ASA5505 securtiy plus.

I can not get the vlans to work correctly. Only one SSID will work at a time and only when it is connected to the native vlan.

I have attached my configs



Correct Answer by mirek.tichy_2 about 9 years 1 month ago

Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.

So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.

Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mirek.tichy_2 Mon, 03/31/2008 - 02:17
User Badges:

Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.

So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.

Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.


Actions

This Discussion

 

 

Trending Topics - Security & Network