migrating 1240 to lwapp

Unanswered Question
Mar 28th, 2008

I converted a 1240 ap from autonoumous to lwapp using the upgrade tool. The one step I missed was to configure the .csv file to obtain a hash key for the ap so I can add to the controller. Is there a way I can do this manually.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Fri, 03/28/2008 - 17:25

When I have converted an Autonomous 1242 to LWAPP, I have never had to enter the SSC. Basically the .csv file did not have anything in it. Only on the older AP's did I have a SSC to add. Just try to have to AP join the WLC. If you believe you need the SSC, then just convert back to IOS and convert back to LWAPP.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode