nameif ethernet1 inside sec100
ip address 10.0.0.1
nameif ethernet2 dmz sec10
ip address 192.168.20.1
route inside 10.10.10.0 255.255.255.0 10.0.0.2
access-list dmz permit ip any 10.10.10.0 255.255.255.0
access-group dmz in interface dmz
What static nat command would i need to permit my dmz host
to access the 10.10.10.0 subnet inside my network?
would this work..static (inside,dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0?