Not able to connect from outside IP

Unanswered Question
Mar 29th, 2008
User Badges:

Hi, the Firewall configuration is attached

When I try to access by remote desktop from outside IP to Server (vrw-appdb-001) then I am not able to connect. Please check above config if you find anything wrong then please let me know.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


I am able to connect to the said server via Remote Desktop just fine. The problem is possibly on your side.

On a security note.. I would suggest an alternate approach to allowing access like this. You might want to think about possibly a VPN account and using that to access these devices. Leaving them open to the world over these protocols is extremely dangerous.

Anyway, best of luck!

tejas_2207 Sun, 04/06/2008 - 08:51
User Badges:

hi there

U r using a wrong command for connecting the outside

access-list vrw-vpn-001_splitTunnelAcl standard permit

access-list vrw-vpn-001_splitTunnelAcl standard permit

here u use a subnet mask u have to use a wild card mask

try this command once



This Discussion