03-29-2008 06:52 AM - edited 03-11-2019 05:24 AM
Hi, the Firewall configuration is attached
When I try to access by remote desktop from outside IP to 196.44.242.51 Server (vrw-appdb-001) then I am not able to connect. Please check above config if you find anything wrong then please let me know.
03-29-2008 07:57 AM
Hi ray
Please rate the posts which helped you in the previous questions you have asked. Rating does not cost any fee.
http://forums.cisco.com/eforum/servlet/NetProf?page=help_rating
Regards
03-29-2008 08:19 AM
Ray,
Am I understanding right, you are not able to Remote Desktop (RDP) into the network from APPDB?
***Edit***
I see what you're saying now.
03-29-2008 08:23 AM
Ray,
I am able to connect to the said server via Remote Desktop just fine. The problem is possibly on your side.
On a security note.. I would suggest an alternate approach to allowing access like this. You might want to think about possibly a VPN account and using that to access these devices. Leaving them open to the world over these protocols is extremely dangerous.
Anyway, best of luck!
04-06-2008 08:51 AM
hi there
U r using a wrong command for connecting the outside
access-list vrw-vpn-001_splitTunnelAcl standard permit 192.168.50.0 0.0.0.255
access-list vrw-vpn-001_splitTunnelAcl standard permit 192.168.51.0 0.0.0.255
here u use a subnet mask u have to use a wild card mask
try this command once
thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: