cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
258
Views
5
Helpful
1
Replies

Help on ASA5510

techtips03
Level 1
Level 1

Hi

I have a ASA5510 and have some questions as below

I am thinking to configure 1 ASA5510 in active/passive mode on the same device by creating multiple contexts on it. Is this possible if I have security plus license on it? Can one ASA5510 be configured in Active/passive mode?

I would like to configure DMZ interface and create a link to a remote location on the same ASA unit.

Can you help me with some configuration example on both the questions above?

Thanks

1 Reply 1

cpembleton
Level 4
Level 4

You need 2 identical ASA's to do failover. You can't failover between 2 contexts on the same ASA.

DMZ setup is the same as configuring inside our outside. Just set the security level higher than outside but lower then inside. Link below should help.

http://www.cisco.com/en/US/docs/security/asa/asa72/getting_started/asa5500/quick/guide/dmz_b.html.

Thanks,

Chad

Please rate if helpful!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: