Voip auto QOS 3560 - queuing working?

Unanswered Question
Mar 30th, 2008

Hello All:

I have recently deployed Auto QOS for VOIP on a 3560 using Mitel phones. This is a test case for my enviroment.

Auto QOS has done its magic with multiple entries and all looks correct, but when I check a given interface with 'show int fa0/x' the queuing strategy comes up as FIFO. Should it not be SRR for the 3560? Not sure the queuing strategy is being applied.

Any help appreciated.

Thanks,

Dan Salmon

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Collin Clark Tue, 04/01/2008 - 12:22

Dan-

Try this command instead,

show mls qos interface queue

You should see something similar to this,

FastEthernet0/9

Egress Priority Queue : enabled

Shaped queue weights (absolute) : 25 0 0 0

Shared queue weights : 10 10 60 20

The port bandwidth limit : 100 (Operational Bandwidth:100.0)

The port is mapped to qset : 1

dsalmon01 Tue, 04/08/2008 - 20:31

Thanks for the info.

I had a chance to try the command today.

Here is the output:

sw3-acs# show mls qos int fa0/14 queueing

FastEthernet0/14

Egress Priority Queue : enabled

Shaped queue weights (absolute) : 10 0 0 0

Shared queue weights : 10 10 60 20

The port bandwidth limit : 100 (Operational Bandwidth:100.0)

The port is mapped to qset : 1

Actions

This Discussion