Connectig an AP1131 act as WGB to AP root with two VLANS and two SSIDs

Answered Question
Mar 31st, 2008
User Badges:

Someone Knows, if I can connect an AP 1131 configured as WGB to other AP 1131 acting as root with 2 Vlans and 2 SSIDs, and pass all of them to the WGB ethernet port, a mean, passing the traffic from the 2 differents VLANs with two differnts IP range from the ethernet AP root port, to the ethernet WGB port.


Thanks.



Correct Answer by mirek.tichy_2 about 9 years 1 month ago

Unfortunately it will not play. AP as a WGB can cary only one (native) VLAN. For interconnecting more VLANs you need a full wireless bridge but it cannot be AP11xx.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mirek.tichy_2 Mon, 03/31/2008 - 03:38
User Badges:

Unfortunately it will not play. AP as a WGB can cary only one (native) VLAN. For interconnecting more VLANs you need a full wireless bridge but it cannot be AP11xx.

e.bayon Wed, 04/02/2008 - 02:40
User Badges:

And what about using AP1242AG in the same scenery?


It could be fine, if configure them as Bridge?


Regards

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode